Setup guide

o Kernel Rebuild Not Required: If a customer has a newer, 80GB OS partition hard drive,
they will receive this message when they click on Admin>Tools>APC UPS Monitor. Proceed
to Step II: Installing APC UPS Monitor.
Step I: Rebuilding the Kernel
If the Customer has one of the 2007 80GB OS partition drives, go to the next step, otherwise,
you must rebuild the kernel.
1. cd /usr/src/sys/i386/conf
2. Perform a ls on the directory.
3. Edit or vi one of the following files: MONTAGE or MONTAGESMP. Under the ‘USB
support’ section, search for the line that looks like this:
device uhid #Human Interface Devices