Setup guide

transmits this data to our remote activation servers. This method is useful in that it allows a
single content package or module to be activated if there are other packages/modules that you
would like to leave inactive for whatever reason.
Manual Activation
Manual activation does not require that the SAFARI Montage server have Internet access. If the
two methods above fail, you can use this method. You will be required to browse to our product
activation website. The activation website will require that you enter your SAFARI Montage
Product ID and Unit ID. Your Product ID is affixed to a label on your product packaging.
Your Unit ID can be found in SAFARI Montage:
1. Click ‘Admin’ on the SAFARI Montage header.
2. Click ‘Settings’ from the secondary navigation menu.
3. If you want to activate a content package, click ‘Content Packages’ from the Settings submenu.
To activate an add-on module, ‘Add-On Modules’ from the Settings submenu.
4. Click the ‘Activation’ link next to the item you wish to activate.
5. Click the ‘Manual’ button.
6. Write down the Unit ID shown or leave this browser window open in the background. You will
need that Unit ID at the activation site.
7. From an Internet-connected PC, browse to our product activation website. Click the SAFARI
Montage logo, or choose ‘SAFARI Montage’ from the ‘Activation’ menu. For full instructions,
browse our
manual activation support site.
For more information, see the Help page ‘Content Packages and Add-On Modules.’