Setup guide

Confirm that the content package or add-on module now has a green check mark in the Active
column.
7. If you are logged into a WAN Manager Parent Server only: After the package or module is
activated, you must assign the package/module to a school or schools. See the help page ‘WAN
Manager Media and License Management’ in the WAN Manager Guide.
Manual Activation
Manual Activation can be used in the event that the SAFARI Montage server fails to connect to
our activation servers or does not have access to the Internet.
To perform manual activation on a particular content package or module, follow the steps below.
1. Click ‘Admin’ on the SAFARI Montage header.
2. Click ‘Settings’ from the secondary navigation menu.
3. If you want to activate a content package, click ‘Content Packages’ from the Settings submenu.
To activate an add-on module, click ‘Add-On Modules’ from the Settings submenu.
4. Click the ‘Activation’ link next to the package/module you wish to activate.
5. Click the ‘Manual’ button. The manual activation screen will display. (The image below is an
example of the manual activation screen for a content package.)
6. Enter your Activation ID and Password and hit ‘Activate.’ To acquire your Activation ID and
Password, record the Unit ID from the screen shown, and have your Product ID from your
package label handy.