Setup guide

The update will take several minutes to complete. If you are updating the software on your
SAFARI Montage server, then your server will reboot once the update is finished. If you are only
running a content update, the server will not reboot when the update is complete.
Note: The software update will update all point releases as well as patch releases. If your server
is in a WAN parent/child environment or you have expansion servers, it is suggested that you
update your WAN parent or WAN controller server first. After updating the WAN controller
server, the expansion servers will be automatically updated. If your WAN environment has child
servers, you can opt to have your child servers automatically update once the WAN parent is
updated - see Help page ‘Remote School Servers’ in the WAN Manager Guide. If you do not
enable this feature, then you must manually update each child server once the update has been
installed on the WAN parent.
Release Notes
Release notes for versions of SAFARI Montage can found here or by clicking the ‘Release
Notes’ link on the ‘Software Update’ page.