Installation Manual

Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au
Page 8 of 8
17
Install the black hose clamp (Item
16) loosely over the base of the
air ram assembly (Item 2).
Install the air ram assembly onto
the snorkel body.
Align the air ram assembly and
tighten the black hose clamp
(Item 16).
18
Install the guard mounted indicator (if fitted to vehicle), guard liner, mud flap, air cleaner
element, air cleaner lid, reconnect sensor wiring, re-install the LHS Battery and connect all
battery terminals, re-install any other items that may have been removed during the snorkel
installation process.
19
N.B: It is the installer's responsibility to ensure that all connections are water tight.