System information

6. Install the original OS drive, labeled OS Drive 1, into Bay 9 of the server. Wait for the drive to be
recognized by the Virtual Disk Management tool.
Clear a Foreign Configuration
a. Select Foreign Configuration View, from the top navigation, using the arrow keys.
b. Press <F2> to display the available options.
c. Press the <↓> and highlight Clear.
d. Press <Enter>.
e. Clear is complete.
Create a Global Hot Spare
a. Select PD Mgmt, from the top navigation, using the arrow keys. This screen lists the physical
disks in the server.
b. Press the <↓> and highlight physical disk 09.
c. Press <F2> to display the available options.
d. Press the <↓> and highlight Make Global HS.
e. Press <Enter>.
f. Global Hot Spare complete.
7. Install the remaining drives removed in Step 3 into their respective drive bays. Wait for the drives to be
recognized by the Virtual Disk Management tool.
Import a Foreign Configuration
a. Select Foreign Configuration View, from the top navigation, using the arrow keys.
b. Press <F2> to display the available options.
c. Press the <↓> and highlight Import.
d. Press <Enter>.
e. Import is complete.
8. Exit the Virtual Disk Management Tool by press <ESC>, selecting Yes and pressing <Enter>.
9. Press <Ctrl><Alt><Del> when instructed to reboot the server with the new configuration.
10. Configure the Network Settings of the SAFARI Montage Server and test by accessing the SAFARI
Montage web interface using the assigned network address.
11. Restore the SAFARI Montage system from the backup created in Step 1.
12. Store the remaining original OS drive, OS Drive 2, in case a system recovery is needed.
G1250V01D Page 28