System information

NOTE: If you are replacing the operating system drives in a WAN-880x or WAN-1240 server, you will see both
hard drives listed under Virtual Disk 0. If you are only replacing one drive in a RAID array pair (WAN-880x and
WAN-1240 servers only), we recommend waiting until the RAID has been rebuilt before exiting the configuration
utility.
Step 6: Exit the configuration utility.
Press the “Esc” key to exit the configuration utility. Select the “OK” box using the arrow keys and press “Enter”.
You will be prompted to reboot by pressing the CTL-ALT-Delete key combination.
G1250V01D Page 12