Manual

Enforcer and Cohort Reassembly
Turn slide upside down. Flip barrel link toward the
muzzle and ease barrel into the slide until it seats on
the locking lugs in the top of the slide.
Flip barrel link to the rear.
Insert the recoil spring system.
NOTE: The triple-
spring recoil system is not designed to be disassembled
except by factory-trained experts. Do
not take this sys-
tem apart.
Flip barrel link to upright position.
Align the grooves in the receiver with the lugs on the
slide and press them together until the barrel link
hole is visible through the hole for the slide stop.
Insert the slide stop.
NOTE: Do not try to
align the barrel link,
the disassembly notch
and the top of the slide
stop all at the same
time. Align the link
first, insert the slide
stop shaft, and then
rotate the slide stop
upward until it aligns
with the disassembly
notch. Be careful not to
mar the
finish on your
pistol. The slide will
move easily for align-