Manual

Remove slide unit by moving it for-
ward and off the frame.
Remove the recoil system by pulling
it back out of the recoil spring tun-
nel. (Flip the barrel link to the rear to
make it easier).
DO NOT ATTEMPT TO DISAS-
SEMBLE THE RECOIL SPRING
ASSEMBLY.
The barrel can now be removed by
flipping the barrel link forward and
pulling the barrel out the front of the
slide.
Reassembly is the reverse of the
above order. During reassembly, the
barrel link is put in the forward
position to insert the barrel, then
moved to the rear position to allow
the recoil system to be seated. Be
sure you can see the hole in the bar-
rel link through the disassembly
notch before inserting the slide stop.
Note: If guide rod protrudes from
the pistol after assembly, the pistol is
incorrectly assembled. Please try
again
Your
Enforcer® or Cohort® is now
disassembled for cleaning
- no fur-
ther disassembly is advisable.