Manual

Big Deuce Reassembly
the hole for the slide stop. Insert the slide stop.
Turn slide upside down. Flip barrel link toward the
muzzle and ease barrel into the slide until it seats on the
NOTE: Do not try to align the barrel link, the disassem-
locking lugs in the top of the slide.
bly notch and the top of the slide stop all at the same time.
Align n the link first,
insert the slide
stop shaft,
and then
Press in the barrel bushing
and twist it clockwise to
lock.
Flip barrel link to the rear.
Insert the recoil spring
cap
Ease guide rod into recoil
spring and feed it into the
recoil spring
cap as
shown. The spring is very
stiff under compression
and will try to kink or get
away from you. It is advis-
able to grip the slide and
compressed spring with
one hand while the other
hand feeds in the remain-
der
.
Flip barrel link to up-right
position.
Align the grooves in the
receiver with the lugs on
the slide and press them
together until the barrel
link hole is visible through