Manual

Move slide back until take-down
notch is above slide stop tab.
Remove slide stop.
Remove slide (top end) by sliding for-
ward off the frame.
Remove recoil guide end and spring
from underside of slide/barrel.
Flip barrel link forward toward muzzle
and remove barrel by pulling it out of
the muzzle end of the slide.
Clean and lubricate, and reassemble by
following the instructions on the next
page.
When re-assembling, make sure barrel
link is flipped back (away from muz-
zle) before inserting slide stop.
Make
certain you can see the barrel link
hole through the slide stop opening.