User guide

Establishment of the Tone Quality of Recording
1. Please push MENU/HOLD Key four times for short time under Stop Mode.
(Figure 5-7
2. Establish LIGHT LP,SP and HQ with NEXT/BACK Ley. (Figure 5-7, 5-8, 5-9)
3. If you want to select changed Mode, move to next Menu through pushing MENU Key, push
(STOP/DEL) Key or wait for 10 seconds.
LP : It is possible to record low tone quality with 6.4 Kbps for long time.
SP : It is the standard tone quality with 8 Kbps.
HQ : It is possible to record high tone quality with 14.6 Kbps but recording time is diminished.
(Refer to the product specifications on page 37.)
Notes
4
ƃ It is the method to establish the Tone Quality of Recording.
(Recording time depends on establishment)
ƃ When you buy product first, it will be established as SP Mode .
( Figure 5-7) ( Figure 5-8)
( Figure 5-9)
21
Establishment of Back Light
1. Please push MENU/HOLD Key three times for short time under
Stop Mode. (Figure 5-5)
2. Establish LIGHT ON/OFF with NEXT/BACK Key.
(Figure 5-5, 5-6)
3. If you want to select changed Mode, move to next
Menu through pushing MENU/HOLD Key, push (STOP/DEL)
Key or wait for 10 seconds.
4. If you press any button after you setup the function to "On",
backlight will be on for about 3 seconds.
ƃ It is the method to decide whether to turn on
Back Light or not when you pushing Key.
ƃ When you buy product first, it will be established
as Back Light ON Mode .
3
( Figure 5-5) ( Figure 5-6)