User guide

13
Recording from external appliances (Audio, PC)
Establish sensitivity of recording, folder, VOR function and tone quality
(HQ, SP and LP) in prior to recording.
In case of LINE recording, too much volume can cause distortion of sound.
1. Connect one end of the audio cable to the Audio Cable Connector (LINE) of your Sound MAP
and the other end to the external appliance (Audio or PC). (
See following Picture)
2. Adjust the Audio Cable switch to 'LINE'. (See following Picture)
3. Play the external audio.
4. Follow the same procedure as with the built-in microphone .
Plug in the earphone to listen to the sound input from the external appliance.
Note : If you do not adjust the Audio Cable switch to 'LINE', you may not
listen to the sound from the earphone or the sound can be distorted.
The sound from the earphone may change slightly when recording starts. However,
this will not have any effect on the actual recording.
You can adjust the volume in the middle of recording.
1
Recording with line-in
Main unit
Audio Cable
External appliance