User guide

Recording

Please note the followings before you start recording

Check that the product is in standby mode.

Press and hold PLAY/PAUSE button in the stop state to turn off the power.

Ȟ If it is not established as Recorder Mode (the Mode of Picture 1-1), recording is impossible.

Press the (Play/Pause) button to display the remaining recording capacity.

The maximum index number for each Folder is 99 (Up to 297 Folders: 99 X 3 )

If the recorded time exceeds the capacity limit, "FULL" is displayed in the LCD.

Then, you have to delete a part of the recorded contents to continue to record.

Before you delete, copy the contents into the external appliances (tape or computer).

Ȟ If the number of the recorded files is over 99, "FULL" is displayed in the LCD.

Then, push Folder/Repeat key and move to other folder to record.

If each folder such as A, B or C has 99 recorded files, you cannot

record at all. So delete several recorded files and continue to record

after copying the files into the external appliances (tape or computer).

Ȟ Don't take out battery or connect USB to PC in the middle of Recording.

It may cause error.

Ȟ In case of long-term recording, please use it after previously replacing

battery in STOP Mode or turned-off state.

Ȟ Do not touch or move the product while you are recording via the built-in

Microphone. This may cause unnecessary noise on your recording.

Ȟ The recording will automatically be paused when the level of sound resource

decreases while VOR is on.

Ȟ Pause Mode in the middle of Record will be continued for 30 minutes and

become STOP Mode after 30 minutes.

(Figure 2-1)