User guide

© SAF Tehnika JSC
Ver. 1.3, 2012 March
CFIP PhoeniX series
Hybrid split mount system
CFIP PhoeniX M IDU Technical Specification
Data modules
Expanded Base - 14 x E1, high-density Molex connector
- 2 x E1, RJ-48C connector
- Voice, Data ORW RJ-48C connectors
- 100BaseTX, 1-100 Mbps, two RJ-45 ports
42E1 Base - 42 x E1, 3x high-density Molex connector
- Voice, Data ORW RJ-48C connectors
- 100BaseTX, 1-100 Mbps, two RJ-45 ports
GigE Base - 4x10/100/1000Base-T ports with RJ-45 connector
- Ethernet SFP connector
- 2 x E1, RJ-48C connector
- Voice, Data ORW RJ-48C connectors
Optional modules
16E1 Expansion module - 14 x E1, high-density Molex connector
- 2 x E1, RJ-48C connector
21E1 Expansion module - 21 x E1, 2x high-density Molex connector
STM-1 Optical mini module
STM-1, Single mode 1310 nm, SC Duplex Transceiver, Unconditionally eyesafe
laser IEC 825/CDRH Class 1 Compliant
STM-1 Electrical mini module
STM-1, 2xBNC, ITU-T Rec. G.703, 75Ohm
Unified Modem
Modulation QPSK, 16QAM, 32QAM, 128QAM, 256QAM
Channel bandwidth 7 – 56 MHz
Capacity up to 348 Mbps
Configurations - 1+0, 1+1 (HSB/SD/FD)
- East-West repeater within single unit
- Ethernet Ring/Mesh (with RSTP)
- E1 ring protection
- STM-1 ADM (up to 63E1 per STM-1)
- 2+0, 3+0, 4+0 (Ethernet aggregation)
ACM Yes
Connectors TNC (Female) and RJ45 (for XPIC)
Intermediate Freq. Range Tx carrier: 350 MHz, Rx carrier: 140 MHz
IDU-ODU cable 300m
Emissions mask ETC 300 234, ETSI EN 301 216, FCC Part 101.111
FEC concatenated Reed-Solomon Coding with Trellis Coded Modulation, or Convolutional
code
Gigabit Ethernet
Switch type Managed Gigabit Ethernet Layer 2
Max frame size 9728 bytes
MAC table 4K entries; automatic learning and aging
Flow Control 802.3x
VLAN support 802.1Q (up to 4K VLAN entries)
QinQ (Double Tagging) Yes
QoS
Port priority, 802.1Q VLAN Tag Priority, IPv4 TOS priority, DiffServ (DSCP)
priority
Spanning Tree Protocol 802.1D-2004 RSTP