Owner's manual

CFIP Marathon series

Ver. 1.10, 2014

Microwave Radio System

PORTS

RF Output (to antenna) 1x N-type Female

4x RJ-45 (data trafic, management port) 10/100/1000 Base-T

Marathon II,

Marathon II HP

optional features

E1/T1 4x E1 (4x RJ-45) +8x E1 (8x RJ-45), 12xE1 version only

E1 Fractional mode 1x E1 with fractional E1 G.704 support, 1-32 Time Frames switchable

Serial interface port for traffic +2x DB-25, V.24/V.28 serial version only³

RSSI port for RSL 2mm test jack, output V vs RSL: 0 to 2V vs -120 to -20dBm

Serial port for MNGT configuration 1x DB-9

Alarm 4 digital inputs, 4 relay outputs (26 pin hi-density D-SUB)

EOW port 2x 3.5mm, headset and mic, 64 Kbps

1+1 Protection port 1x RJ-45, 1xPower protection port³

DC power connector 1x 2ESDV-02 with screw locks

MANAGEMENT

Management ports Ethernet VLAN or Separate Ethernet (RJ45)

SNMP Yes, SNMP traps, MIB, SNMP v1/v2c

Element Management System Web based HTTP, Telnet, FTP, Serial ASCII

Performance graphs

Rx level, Tx level, Radial MSE, LDPC decoder stress, System temperature,

Modem temperature, Input voltage, Power consumption, Equalizer graph,

Uptime (counter only)

Ethernet performance Per port Ethernet counters, Enhanced radio Ethernet statistics

Loopbacks E1, modem, RF loopback

ENVIRONMENTAL REQUIREMENTS

Stationary use

Climatic Class 3.1E compliant (ETSI ETS 300 019-1-3); weather

protected locations

Temperature range -5

to +55

MECHANICAL & TECHNICAL DATA

Marathon II Marathon II HP

Dimensions: HxWxD 88x482x230mm, 1U 19” Rack 88.9x482x230mm, 2U 19” Rack

Weight 3.8kg 5.2kg

DC port -40.5V to -57V DC (conforms to ETSI EN 300 132-2)

Built-in DC and antenna port surge protection Conforms to ETSI EN 301 489-1; EN 61000-4-5; IEC 61000-4-5

Max. Power consumption Up to 30W Up to 45W

Optional