Technical Specifications

DOUBLE WALL SPECIAL GAS VENT
12
Saf-T Vent
®
SC
Terminations:
Rain Cap — Use as a termination on vertical systems. Category I and II appliances require a raincap or other device to
prevent rainwater from entering the vent. Vent systems for positive pressure appliances may omit the raincap if there are
other provisions for draining rainwater from the system. The raincap may also be used as a horizontal termination.
B
C
A
E
Part Number DIM - A DIM - B DIM - C APPLICATION
Nominal Cap Outer
Diameter Height Band
5300CI 3 8.5 8 All Categories
5400CI 4 8.5 9 All Categories
SC03RC 3 5.5 5 Category III & IV Only, if system has drain.
SC04RC 4 6.3 7 Category III & IV Only, if system has drain.
Rain Cap
Part DIM - A
Number Nominal Diameter
9392 3
9492 4
Screen Termination — Use as a termination on horizontal or vertical systems, as specified or allowed by the
appliance manufacturer.
SCREEN
1.25
INSTALLED
LENGTH
A
Screen Termination
B
C
A
SC_ _ RC 5_00CI
© Copyright 2013 Selkirk Corp.
Heatfab Saf-T Vent are registered trademarks of Selkirk Corp.
AL 29-4C is a registered trademark of ATI Properties, Inc.
UL and the UL Mark are registered trademarks of
Underwriters Laboritories, Inc.
Pub # 11723 4/2/13