Technical Specifications

DOUBLE WALL SPECIAL GAS VENT
10
Saf-T Vent
®
SC
A
C
D
B
Horizontal Termination Adapter— Use to complete the Saf-T Vent SC system after penetrating an exterior
wall. Standard Saf-T Vent terminations connect directly to the adapter. The screened openings release excess heat from the
system and must not be blocked. On Sealed Combustion systems the screened openings supply combustion air to the appliance.
Vertical Termination Adapter — Use to complete the Saf-T Vent SC system on vertical installations. Standard
Saf-T Vent terminations connect directly to the adapter. The screened openings release excess heat from the system and
must not be blocked. On Sealed Combustion systems the screened openings supply combustion air to the appliance.
Part Number DIM - A DIM - B DIM - C DIM - D
Nominal Nominal Installed Diameter
Vent Pipe Outer Jacket Length Protective
Diameter Diameter Band
SC03VT 3 5 3.8 7.1
SC04VT 4 7 3.8 9.1
Part Number DIM - A DIM - B DIM-C
Nominal Nominal Installed
Vent Pipe Outer Jacket Length
Diameter Diameter
SC03HT 3 5 5.3
SC04HT 4 7 5.6
Terminations:
B
A
C
Termination
Attaches Here
Termination
Attaches Here