Technical Specifications

DOUBLE WALL SPECIAL GAS VENT
6
Saf-T Vent
®
SC
B
90°
D
A
C
D
45°
A
B
C
E
F
Elbows:
45° Elbow — Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable.
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E DIM F
Nominal Nominal Rise Run Combined Offset
Vent Pipe Outer Jacket Installed Height
Diameter Diameter
SC03E45 3 5 3.1 3.7 11.60 4.8
SC04E45 4 7 3.3 4.3 13.03 5.3
90° Elbow— Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable.
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E DIM F
Nominal Nominal Rise Run Combined Offset
Vent Pipe Outer Jacket Installed Height
Diameter Diameter
SC03E90 3 5 6.1 7.0 13.1 13.25
SC04E90 4 7 6.8 7.75 14.5 14.50
45° Elbow
90° Elbow
F
E