Technical Specifications

DOUBLE WALL SPECIAL GAS VENT

Saf-T Vent

Part Number DIM - A DIM - B DIM - C DIM - D DIM - E

Nominal Nominal Installed Centerline of Air Intake

Vent Pipe Outer Jacket Length Tap to Outlet Connection

Diameter Diameter Diameter

SC03TAD3 3 5 9 4.0 3

SC03TAD4 3 5 10 4.6 4

SC04TAD4 4 7 10 4.6 4

SC04TAD3 4 7 9 4.0 3

Part Number DIM - A DIM - B DIM - C DIM - D DIM - E

Nominal Nominal Installed Drain Drain

Vent Pipe Outer Jacket Length Location Diameter (OD)

Diameter Diameter

SC03DRN 3 5 6.7 3.3 0.5

SC04DRN 4 7 6.7 3.3 0.5

Adapters:

Air IntakeTee — Use to begin a Sealed Combustion system. The male end connects to Saf-T Vent EZ Seal or Saf-T Vent

appliance adapters and flue collars. The tap on the outer wall should be connected to the combustion air inlet on the appliance using

materials specified by the appliance manufacturer.

Single Wall Adapter/Appliance Adapter — Use to transition from single-wall to Saf-T Vent SC. The male

end connects to Saf-T Vent EZ Seal or Saf-T Vent appliance adapters and flue collars. The outer diameter collar is vented and must

not be blocked during installation or operation.

Part Number DIM - A DIM - B DIM - C

Nominal Nominal Installed

Vent Pipe Outer Jacket Length

Diameter Diameter

SC03ADEZ 3 5 4

SC04ADEZ 4 7 4

Single Wall Adapter/

Appliance Adapter

Air Intake Tee

Bottom View,

Vented Area