Technical Specifications

DOUBLE WALL SPECIAL GAS VENT

Saf-T Vent

Part Number DIM - A DIM - B DIM - C DIM - D DIM - E

Nominal Nominal Installed Drain Drain

Vent Pipe Outer Jacket Length Location Diameter (OD)

Diameter Diameter

SC03DRN 3 5 6.7 3.3 0.5

SC04DRN 4 7 6.7 3.3 0.5

Vertical/Horizontal In-Line Drain Section — Use to drain away condensate from the vent system.

The unique design of this part allows it to be installed in a horizontal, vertical or inclined orientation. Continuous horizontal runs

in excess of 30 feet require a condensate drain. Drains may also be required by the manufacturer. High temperature silicone

rubber tubing is available separately, see below.

Accessories:

In-Line

Drain Section

Condensate Drain Tube Kit — This kit contains a length of high temperature silicone rubber tubing, a clamp, and two

cable ties. The silicone tubing is rated for 500°F, and is translucent to allow inspection of the P-trap. Larger diameter drains can be

plumbed directly into a drain system.

Part Number: 7000TUBE 5 feet of 3/8" diameter tubing

7000TUBE-10 10 feet of 3/8" diameter tubing

7001TUBE 10 feet of 1/2" diameter tubing