Technical Specifications

Saf-T Vent

EZ Seal

SINGLE WALL AL 29-4C

SPECIAL GAS VENT

5 Ft. Length — Install vent with a continuous pitch of 1/4” per foot, sloping upward toward the

termination, draining back toward the appliance or inline drain. It is important to provide adequate support to

a Saf-T Vent EZ Seal system. Support horizontal portions of the vent system at 6-foot intervals. Vertical

sections should be supported at least every 30-feet and after every offset or transition.

Straight Lengths:

Part Number DIM - A DIM - B DIM - C

Nominal Diameter Installed Length Maximum OD

9360 3 59.5 3.4

9460 4 59.5 4.4

4 Ft. Length — Install vent with a continuous pitch of 1/4” per foot, sloping upward toward the termination, draining

back toward the appliance or inline drain. It is important to provide adequate support to a Saf-T Vent EZ Seal system. Support

horizontal portions of the vent system at 6-foot intervals. Vertical sections should be supported at least every 30-feet and after

every offset or transition.

Part Number DIM - A DIM - B DIM - C

Nominal Diameter Installed Length Maximum OD

9308 3 46 3.4

9408 4 46 4.4

9508 5 46.5 5.4

9608 6 46.5 6.4

9708 7 46.5 7.4

9808 8 46.5 8.4

9908 9 46.5 9.4

91008 10 46.5 10.4

91208 12 46 12.4

91408 14 46 14.4

91608 16 46 16.4