Technical Specifications

Saf-T Vent

EZ Seal

SINGLE WALL AL 29-4C

SPECIAL GAS VENT

Elbows:

70° Elbow— Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam

elbows is not adjustable. The pressure drop for each elbow is equivalent to 8 feet of vent for 3 and 4 inch diameters and 12 feet

for 5 through 16 inch diameters.

Part Number DIM - A DIM - B DIM - C DIM - D DIM - E

Nominal Rise Run Combined Offset

Diameter Installed Height

9312 3 5.6 4.4 14.0 9.4

9412 4 7.7 6.2 18.7 13.1

9512 5 8.1 6.6 19.6 13.7

9612 6 8.4 6.9 20.5 14.4

9712 7 8.8 7.3 21.5 15.0

9812 8 9.1 7.6 22.4 15.7

9912 9 9.5 8.0 23.4 16.4

91012 10 11.0 9.5 27.5 19.3

91212 12 14.9 9.2 28.6 20.0

91412 14 12.4 10.9 31.3 21.9

91612 16 13.1 11.6 33.2 23.2

70° Elbow

70°