Specifications

Page 10 / 13 Rev. 3 / Jan. 2009 Saeco International Group
07 DISASSEMBLY TALEA / ODEA - LINE
To disassemble/adjust the grinding disc
7.11. Grinders
Fig. 1
Press against the grinding level setting •
axis and then turn the grinding disc
support anticlockwise until it stops,
then remove it.
Fig. 2
Turn the grinding disc anticlockwise 1.
out of the support.
Fig. 3
Turn the grinding disc anticlockwise •
out of the support. The bayonet con-
nections can be accessed from the rear
side.
Fig. 4
In the start position, both markings 1.
must be aligned.
1
2
3
4