Specifications

Page 4 / 13 Rev. 3 / Jan. 2009 Saeco International Group
07 DISASSEMBLY TALEA / ODEA - LINE
7.5. Gear motor device
To disassemble the gears
B
B
1
L
L
5
3
2
Fig. 1
Remove the screws shown.•
Remove the gear cover.•
Caution: The sensor of the residual
water tray is fi tted to the gear cover
(unplug).
Fig. 2
If one of the gear wheels is damaged, •
replace both wheels.
If one of the microswitches is defective, •
always replace both microswitches.
Fig. 3
Gearing mechanism with 2 •
microswitches.
When mounting the large gear wheel, •
take care that the arrow on the gear
wheel is aligned to the axis of the
small double toothed gear wheel.
Fig. 5
When assembling the motor, make •
sure the bearing is fi tted correctly (L).
Fig. 4
Single micro version.•
Install as shown in Fig. 3.•
4