Specifications

Saeco International Group Rev. 3 / Jan. 2009 Page 3 / 13
TALEA / ODEA - LINE 07 DISASSEMBLY
To disassemble the boiler’s pin
To disassemble the power board
Fig. 1
Remove the black board’s cover.•
Loosen the plug contact.•
Remove the screws shown.•
1
7.3. Electronics
7.4. Boiler’s pin
21
3
Fig. 1
Remove the screws shown.•
Remove the water channel cover.•
Fig. 2
Remove the screws (4 off) shown.•
Fig. 3
During assembly, both screws have •
to be tightened alternately at equal
rates to prevent the O-rings from being
squeezed.
To disassemble the control board
Fig. 1
Remove the screws shown.•
Fold the board to the back.•
Fig. 2
Loosen the plug contact.•
Fig. 3
Remove the screws shown.•
1 2
3