Specifications

Saeco International Group Rev. 3 / Jan. 2009 Page 1 / 13
TALEA / ODEA - LINE 07 DISASSEMBLY
To disassemble the SBS
7.2. Housing
7.1. SBS / dispenser
Fig.1
Remove the SBS rotary knob.•
Fig.2
Unscrew the fi xing screw.•
Remove the bracket of the SBS rotary •
knob.
Fig.3
Unscrew the screws shown.•
Fig.4
Remove the drain valve.•
1
2
3
4
To disassemble the housing - front
and upper parts
Fig. 2
Take out the bean hopper cover sensor.•
Fig.1
Remove the cover of the coffee con-•
tainer.
Unscrew the screw marked in the il-•
lustration.
Remove the rotary knob from the hot •
water / steam valve.
Fig. 4
Fix the upper housing around the bean •
hopper.
Pull the front side under the drain valve •
forwards.
Remove the upper part of the housing.•
Fig. 5
Unplug the cup warmer and grounding.•
Fig. 3
Loosen the rear upper part of the •
housing.
1
2 3
4 5
Caution: if you need to remove the upper part of the housing, start by moving the cup lift to its
lowest position then remove the collection tray.