Specifications

TALEA / ODEA - LINE 01 INTRODUCTION
Saeco International Group Rev.03 / Jan. 2009 Page 1 / 4
1.1 Documents required
The following documents are needed for repair work:
Instruction booklet for the related model•
Technical documentation for the related model•
1.2 Tools and resources
As well as the standard equipment, the following is required:
Pieces Description Comment
1 Special screwdriver Torx T 10
1 Pliers for Oetiker clamps
1 Tester CC - A - VDC
1 Digital temperature meter Temperature range > 150°C
1 SSC (Saeco Service Center) Interface for programming
1.3 Materials
Description Comment
Thermal conductance paste Temperature resistance > 200°C
Descaler Saeco descaler
Fat solvent Personal choice
Silicone grease Food-safe
1.4 Safety precautions
Read the instruction booklet before working on the machine.
Observe all applicable standards related to the repair of electrical appliances.
Always disconnect the power plug from the mains before carrying out repairs. Simply turning off
the machine’s main switch is not an adequate safety precaution.
This appliance is rated as protection class I.
The protective measures must be checked after completing all work.