Specifications

Page 10 / 17 Rev. 3 / Jan. 2009 Saeco Internationa Group
05 SERVICE MODALITY TALEA / ODEA - LINE
Function group t.4 - Grinder
Function group t.3 - Water/steam system
Function group t.2 - Heater
fl ow_metre(p/s):
driptray_sens:
waterlevel_sens:
knob_milk:
knob_water/steam
knob_closed:
milkisland present:
carafe present:
valve:
pump water:
*:
Flowmetre pulses (12-17)
ON - Residual water tray full
ON - Water tank full
ON - Hot water / steam valve in pos.
Milk Island
ON - Hot water / steam valve in pos.
hot water/steam
ON - Hot water / steam valve in pos.
closed
ON - Milk Island adapter detected
ON - Carafe microswitch activated
Magnet valve activation
Pump activation
no function
boiler_temp (C°)
cup heater:
boiler:
*:
Temperature recorded by the
temperature sensor.
Cup warmer heats up
Continuous-fl ow heater heats up
no function
pulses_counter:
delay_time (msec)
bean_door:
bean_alarm:
grinder:
*:
bean_test:
Coffee grinder pulses (Hall sensor)
Coffee grinder pulse msec/pulse
ON - Reed sensor bean cover
activated
ON - Beans low (speed exceeded)
Coffee grinder activation
no function
The machine starts grinding and the
relevant message is shown next to
bean_alarm (ON/OFF)
b
c
u
b
*
t.2 -
heating unit
next
boiler_temp (C°) =79.8
cup
heater
Boiler
*
d
w
k
k
k
m
c
a
va
p
*
t.3
-
hydraulic circuit
next
fl ow_meter (p/s) = 0
driptray_sens = OFF
waterlevel_sens = ON
knob_milk = OFF
knob_water&steam = ON
knob_closed = OFF
Milk Island present = OFF
caraffe present = OFF
valve
pump
water
*
pu
d
e
be
b
e
gr
*:
be
t.4 -
grinder unit
next
pulses_counter = 0
delay_time (msec) = 0
bean_door = ON
bean_alarm = OFF
grinder
* bean
test