Specifications

Page 12 / 14 Rev. 3 / Jan. 2009 Saeco Internationa Group
04 FUNCTIONAL PRINCIPLES TALEA / ODEA - LINE
ODEA GO
ODEA GIRO
TALEA GIRO
Function:
Only one electric function is used with appliances in
the Odea and Talea series (without display).
When changing the electronics, the dip-switch posi-
tion must be checked and altered if necessary.
“Descaling with limescale fi lter”
message
(appliances that have a display only)
The water hardness is set in the usual way
by determining the regional water hardness.
(1, 2, 3, 4).
Filter off:
The appliance determines the amount of
water that fl ows through the fl owmetre and
shows the Display "Descaling" according to
the pre-specifi ed quantity of water set via
the hardness setting.
Filter on:
If the function limescale fi lter / Aqua Prima
is turned on in the customer menu, only
every 2nd fl owmetre pulse is counted when
determining the fi rst descaling interval.
The descaling interval is doubled.
“Change limescale fi lter / Aqua Prima”
message
(appliances that have a display only)
Function:
The electronics use the fl owmetre pulses to
count the amount of water that has fl owed
through and, after 60 litres, shows the
“Change fi lter” message.
360°
1 rev
Number of
pulses
Filter
on
Filter
off
Flowmetre pulses
4.15. Descaling request
4.16. Electronical confi guration (DIP - switch settings)
On
On
On