Specifications

TALEA / ODEA - LINE 03 OPERATING
Saeco Internationa Group Rev. 3 / Jan. 2009 Page 12 / 13
3.2 Use, cleaning and maintenance
Cleaning and service
A Empty dreg drawer When message appears
B Empty drip tray When message appears
C Clean water tank Weekly
D Clean coffee bean hopper As necessary
E Clean housing As necessary
F Clean brewing unit 2 - 3 x weekly or after 50 coffees
H Carry out a descaling cycle When message appears
J Clean drip tray Weekly
K Clean brewing unit compartment Weekly
Descaling cycles
Hardness Water hardness Interval without lim-
scale fi lter
Interval with limscale
fi lter
1 Soft water
(up to 7ºdH)
approx. every 3 months /
120 litres
approx. every 6 months /
240 litres
2 Medium hard water
(7º-14ºdH)
approx. every 2 months /
90 litres
approx. every 4 months /
180 litres
3 Hard water
(15º-21ºdH)
approx. every 6 weeks /
60 litres
approx. every 3 months /
120 litres
4 Very hard water
(over 21ºdH)
approx. every 4 weeks /
30 litres
approx. every 6 weeks /
60 litres
Using the machine
1 Insert the limescale fi lter If available
2 Fill water tank
3 Fill bean hopper
4 Turn on the appliance
5 Carry out machine settings (machines
with display only)
Determine and set water hardness, activate limescale
fi lter
IMPORTANT: if the limescale fi lter is not inserted for
longer periods, the relevant setting must be set to "OFF"
otherwise the descaling interval calculated by the appli-
ance is too long and this results in limescale building up
in the appliance.
Two settings must be programmed on models with ring
function:
1. Machine settings: 2.4 Alarm Filter ON/OFF
2. Maintenance / Aqua Prima: 3.1.2 Additional Filter ON/
OFF
6 Specify the product
(machines with display only)
Cup capacity, dosing quantity, prebrewing
7 Press the start key Press 1x for 1 coffee, press 2x for 2 coffees