User's Manual IP EFF Professional Power Amplifier H-2x800WwW I-2exiI000w I-2exI200WwW I-2exIS00WwW Table of contents Warranty... 1 Important Safety Instruction and symbol .2 Foreword, . .3 Front panel function: 11 4 Rear panel functions. 12 .5 System connection cases... 13 6 Specifications. 14 .7 Troubleshooting..
Important Safety Instruction and symbol description Power Amplifier Important Safety Notice 1. Read the rules, pay attention to all warnings, and comply with these rules. 2.1t is forbidden to spray liquid around the product. Please do not placed the liquid container above the product, such as vases, etc. The dry cloth and air pressure gun can be used for cleaning. 3. Be careful not to form a hot air circulation. Please install as the recommended way. 4.
Foreword Power Amplifier Welcome Thank you very much for purchasing the products of Famous Performance Equipment Manufacturing Co., LTD.
Foreword Power Amplifier Front Panel Indicator light description ® — PROTECT Seal reg () or 7 CH2 Isl Professional Power Amplifier Cleaning guide of the dust filter A should be right after installation. quarterly. Please do not run the product without the dust filter, or it makes the service life of the product shorten. Such condition will be considered as no warranty.
Rear panel functions Power Amplifier Rear Panel FAN Circuit Power cable Amp output Signal breaker connector i nim en 5 Bo Signal input INPUT |l4—— Sensitive Selector Itch = ph “el +— Mode selector switch PARALLEL/ BRIDGE STEREO © channel 2 p channel 1 negative a Sensitivity selection should be based on audio system configuration, 8 4 £ chancel positive use occasions, Applicable to people and other requirements, due to channel 2 negative the selection of mismatched may lead to product damage.
System connection cases Power Amplifier Oe 2 [a BIE] Connector: | INPUT Balanced connection male XLR HOT [3] cop) GROUND ¥} LINK Balanced connection base XLR GROUND cop HOHHOT Output connector: SPEAKERPHONE CH1 = = Speak on power output CHE = 2+ | speaker output NL4 SPEAK ON connection made 20mm ~oa smm ¥ 0.9" \' SPEAKERPHONE BLACK CHE RED The quality of your soldering Is very important Virtual welding or soldering errors, Would be likely to affect the normal Use or even failure Stereo mode MODE STEREO chan
Troubleshooting Power Amplifier After powered without any response Measure the outlet with a multi meter to check if there is power available and when no multi meter, you can have a test pencil, If the power supply is normal and the amplifier still no response when powered then there is something wrong with the amplifier, need professional person to check it. No signal output 1 Frost check if the signal input is right. A\Check the connect of XLR, if the 2 and 3 reverted or the ground is reliable, Different
Warranty Power Amplifier Disclaimer SAE Audio Co, Ltd. is not responsible for any damage of loudspeakers or other equipment caused by negligence or improper installation, SAE Audio Co., Ltd. offers 2 years limited warranty for this product. SAE Audio Co, Ltd. Guarantees that this product has no material defect during two years from the sales date; if the damage caused under the normal installation and operation, SAE Audio Co. Ltd.
