Instruction Manual

Installing:
BC-AMP06 Bracket
1. Remove the four (4) upper Bolt from
the Radio support Bracket, using a
T25 Torx bit. (Figure E)
2. Place the BC-AMP06 mount in radio
cradle. (Figure F)
(Caution, Do not over torque
Fasteners. Factory spec is 20 In. Lbs.)
3. Reassemble the fairing in reverse
order of disassembly, on page 1.
BC-AMP06 Amp mounting bracket
Kit features:
• 12 Black zip ties
• 8.5”x6” Hook and loop tape
Figure E
Figure F