Instruction Manual

BC-AMP05 Amp mounting bracket
Kit features:
• 12 Black zip ties
• Hook and loop mounting pad
1. Remove (2) ½” nuts securing the radio and
inner fairing to the bikes frame. Tilt radio
bracket toward the back of bike and
remove the bracket and radio assembly.
(Figure D)
2. Place BC-AMP05 bracket on Brake or
Clutch side of the Motorcycle.
• For proper clearance, ensure that the
bracket is mounted as shown in (Figure E)
and (Figure F).
3. Tighten down bracket with factory ½” nut.
4. Reinstall fairing in reverse order of removal
on page 1.
(Figure D)
(Figure E)
(Figure F)