User Manual

6
Use ROCKit earphones
1. For rst use: Remove ROCKit X earbuds from the case. Both earbuds will blink white on the top
edge LED
2. The le earbud will blink red/white, indicang ROCKit X is in pairing mode and the earbuds are
connected via True Wireless Stereo
3. Switch on Bluetooth on your device
4. Choose “ROCKit X” under Bluetooth sengs on your device. Your earbuds are now connected
with your device
5. Start playing music on your device
6. ROCKit X automacally switches on/o when connected/disconnected to the charging case.
Manually power on/o by holding down the earbud buons for 10 seconds
How to pair ROCKit X earbuds with Bluetooth devices
1. Simply remove your ROCKit X earbuds from the charging case or long press the X buon on your
earbuds for 10 seconds. Aer the rst 5 seconds, you will hear the ON sound. Keep pressing the
buon for another 5 seconds to turn on pairing mode, indicated by ashing red and white LED
lights
2. Please keep the earbuds and Bluetooth device in range of 1 meter when pairing and make sure
ROCKit X is turned on
3. Go into the Bluetooth sengs on your device and search for new Bluetooth devices and select
ROCKit X
4. The LED light will blink white once ROCKit X is successfully paired
5. Long press X buon on the earbuds to turn o your ROCKit X earbuds
6. ROCKit X can remember 8 devices: You can pair 8 units with your ROCKit X, at 9th unit ROCKit X
will forget the rst connected
Operation instructions for use after first pairing
1. Aer rst me pairing your ROCKit X earbuds and Bluetooth device will automacally reconnect
2. Turn the earbuds on by holding down the X buon unl you hear the ON sound or by removing
the earbuds from the case
3. Long press X buon to turn o
7. ROCKit X will automacally pair with the last connected device.
8. To connect to a new device make sure that the previous connected device is disconnected
otherwise connecng opportunity won’t appear on the new device.