User Manual
4
QUICK START GUIDE
When you first get your ROCKit X earphones you need to charge them before they are ready for
use.
Start by placing your ROCKit X earbuds in the charging case. This is how the earbuds charge.
Now charge the charging case by either of 2 options.
1: Place the charging case on a Qi wireless charger, like SACKit´s own CHARGEit.
2: Use the attached USB-C cable and any 5V, 1A power supply.
Charge for 2 hours minimum.
The earbuds charge in the
charging case.
The charging case can charge
on a wireless charger.
The charging case can also be
charged with a USB-C cable.
How to play music:
1. For rst use: remove ROCKit X earbuds from the case. Both earbuds will ash white on the top
edge LED
2. The le earbud will blink red/white, indicang ROCKit X is in pairing mode and the earbuds are
connected via True Wireless Stereo
3. Switch on Bluetooth on your device
4. Choose “ROCKit X” under Bluetooth sengs on your device. Your earbuds are now connected
with your device
5. Start playing music on your device
6. ROCKit X automacally switches on/o when connected/disconnected to the charging case. Ma-
nually power on/o by holding down the earbud buons for 10 seconds
7. ROCKit X will automacally pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecng opportunity won’t appear on the new device.
Please turn o your earbuds aer use to get a longer baery life. The earbuds turn o automa-
cally when placed in the charging case.