Technical data

36
0,6- 0,7 mm
1
Checking the spark plug
Check and change
CAUTION
Check or change the spark plug only
when the engine is cold.
NOTE
The spark plug is accessible from the right-
hand side.
- Pull the spark plug connector (1).
- Unscrew the spark plug with the spark
wrench from the on-bord toolkit.
- Check the electrode gap (0.6-0.7 mm),
replace the spark plug if it is severely
burnt away.
- Use a new spark plug NGK BR7 ES
and tighten up.
NOTES ON MAINTENANCE
- Screw in the spark plug by hand and than
tighten up with the spark wrench.
Torque 11 Nm.
- Plug in the spark plug connector (1).