Technical data
16
RIDING INSTRUCTIONS
Ride economically and be aware of the environment
Fuel consumption, environmental pol lu tion 
and wear of engine, brakes and tyres de-
pend on various factors.
Your personal riding style is highly de ter -
mi nant for economical fuel con sump tion 
and exhaust gas and noise gen er a tion. 
While idling, the engine takes a long time 
to warm up to operational tem per a ture. In 
the warm-up phase, however, the wear level 
and pollutant emissions are very high. It is 
therefore best to start riding immediately 
after start-up.
Avoid rapid acceleration
Open the throttle not further than need ed, 
in order to reduce fuel con sump tion as well 
as pollution and wear levels.
Do not use excessive revs; change up as 
soon as possible and do not change down 
until it is necessary to do so.
Ride as evenly as possible and look 
ahead as far as possible.
Unnecessary acceleration and hard braking 
cause high fuel con sump tion and increased 
pollution levels.
Turn the engine off when waiting in traf-
 fi c.
Different riding conditions affect fuel con-
sumption. The following conditions are un-
favourable for fuel consumption:
- High traffi c density, especially in big cities 
with many stops for traffi c lights.
-  Frequent short rides with repeated starts 
and warm-ups of the engine.
-  Riding in a column of motor cycles at low 
speed, meaning riding with rel a tive ly high 
revs.
Plan rides ahead of time in order to avoid 
heavy traffi c.
Fuel consumption is also affected by con-
ditions that are out of your control, for in-
stance, poor road condition, hills, riding in 
winter.
Observe the following aspects for eco-
 nom i cal fuel consumption:
-  The planned inspection intervals must be 
closely observed.
-  Regular service by a specialized Sachs 
dealer will guarantee not only continued 
operability, but also eco nom i cal fuel con-
sumption, low en vi ron men tal pollution 
and a long lifespan.
- Check the tyre pressure every two 
weeks.
Low tyre pressure increases rolling re sis -
tance. This increases fuel con sump tion 
and tyre wear and adversely af fects riding 
behaviour.
-  Continually check fuel consumption.
-  Frequently check the lubricating oil.










