Specifications

Sabine, Inc. • 13301 NW US Highway 441 • Alachua, Florida 32615-8544 USA • Phone: [phone] • Fax: [phone]
Register your FBX equipment
online at Sabine.com
Or... Push READY anytimetoexit SetupMode
When Filter LEDs cycleleft&right, Stop Raising Gain
Raise Gain Slowly
Push&Hold SETUP Do Not Talk into Mics!
a c t i O n c O n t r O l s
l e d
s t a t u s
d e t a i l s
Stop raising gain when all lter LEDs light back and forth in sequence and turn red; the rst Dynamic lter (green LED) is also set. Setup has now completed. You are ready to go! Important: Reduce gain slightly. This will be your maximum gain setting. Push READY button at any time to exit Setup mode. You are ready to go. The blue LED will ash. Push READY again at any time to Lock Fixed lters - the blue LED stays lit. See the operating guide for more information on locking xed lters. Raise gain slowly. Fixed lter LEDs will ash amber and then remain lit one at a time as lters are set. Wireless Mics: If you are using a wireless mic, stop raising gain after a few lters and move the microphone to another performance area; continue slowly raising gain and repeat. LEDs will ash 5 times, followed by the SETUP button LED ashing. You are now in FBX Setup mode. Do not speak into the mic or play program though the system.
SABINE FBX SETUP
4 3 2 1
Yourmixer
STOP
f i x e d
UNLOCKED
SETUP MODE
UNLOCKED
SETUP MODE
LOCKED
READY MODE
UNLOCKED
READY MODE
For complete instructions, please read the operating guide!