Specifications

Sabine, Inc. • 13301 NW US Highway 441 • Alachua, Florida 32615-8544 USA • Phone: [phone] • Fax: [phone]
Register your FBX equipment online at
www.sabine.com
Or... Push READY anytime to exit Setup Mode
When Filter LEDs cycle left & right, Stop Raising Gain
Raise Gain Slowly
Push & Hold SETUP
Do Not Talk into Mics!
ACTION CONTROLS
LED
STATUS
DETAILS
Stop raising gain when all filter LEDs light back and forth in sequence and turn red; the first Dynamic filter (green LED) is also set. Setup has now completed. You are ready to go! Important: Reduce gain slightly. This will be your maximum gain setting. Push READY button at any time to exit Setup mode. You are ready to go. The blue LED will flash. Push READY again at any time to Lock Fixed filters - the blue LED stays lit. See the operating guide for more information on lock- ing fixed filters. Raise gain slowly. Fixed filter LEDs will flash amber and then remain lit one at a time as filters are set. Wireless Mics: If you are using a wireless mic, stop raising gain after a few filters and move the microphone to another performance area; continue slowly raising gain and repeat. LEDs will flash 5 times, followed by the SETUP button LED flashing. You are now in FBX Setup mode. Do not speak into the mic or play pro- gram though the system.
SABINE FBX SETUP
44 44
4
33 33
3
22 22
2
11 11
1
Your mixer
STOP
FIXED
FILTERS
UNLOCKED
SETUP MODE
UNLOCKED
SETUP MODE
LOCKED
READY MODE
UNLOCKED
READY MODE
For complete instructions, please read the operating guide!