Specification

● CABINET CONSTRUCTION
Standard, cabinet exterior
construction includes attractive, wear
resistant vinyl on steel in black finish.
Stainless exterior options available.
Standard interior construction utilizes
stainless steel walls, floor and ceiling.
● REFRIGERATION
Refrigeration system uses R290
refrigerant, which is CFC and
HCFC-free for compliance with
environmental safety concerns.
● ELECTRICAL
Units wired at factory and ready for
connection to a 115/60/1 phase,
15 amp dedicated outlet.
● TEMPERATURE
Oversized, factory balanced,
refrigeration system holds 33℉ to
38℉(0.5℃ to 3.3℃)
Model:
SDD-30-23
SDD-30-23
Underbar Refrigeration:
Mobility Direct Draw Beer Dispenser
● Standard casters for mobility
● Self-closing doors with key lock
● Reinforced stainless steel interior floor
● Side knock out plugs for gas lines
● Designed to accommodate a variety
of beer kegs
General Specification
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
L D H
SDD-30-23 1
23 1/2
596
30 3/4''
782
38 3/4
984 1/6+ 115/60/1 1.92 5-15P
● Height does not include 15 1/4'' (388mm) for draft arm. ● Plug type varies by country.
● Two-faucets column is option
CONFORMS TO NSF/ANSI STD. 7
NEMA Config.
1
MODEL FEATURES:
Specifications subject to change without notice.
Capacity
1/2 Barrels
HP Voltage Amps
SABA
Add: 3390 Enterprise Avenue, Hayward, CA 94545-3228
Tel: [phone] Fax: [phone] E-mail: [e-mail] Website: www.sabacorpusa.com
Model Doors
Cabinet Dimensions
(inches / mm)