Dimensions Guide

CABINET CONSTRUCTION
Standard, cabinet exterior
construction includes attractive, wear
resistant vinyl on steel in black finish.
Stainless exterior options available.
Standard interior construction utilizes
stainless steel walls, floor and ceiling.
REFRIGERATION
Refrigeration system uses R290
refrigerant, which is CFC and
HCFC-free for compliance with
environmental safety concerns.
ELECTRICAL
Units wired at factory and ready for
connection to a 115/60/1 phase,
15 amp dedicated outlet.
TEMPERATURE
Oversized, factory balanced,
refrigeration system holds 33 to
38(0.5 to 3.3)
SANITATION
Model:
SDD-30-23
SDD-30-23
Underbar Refrigeration:
Mobility Direct Draw Beer Dispenser
SANITATION
NSF-7 approved for packaged and
bottled product.
Standard casters for mobility
Self-closing doors with key lock
Reinforced stainless steel interior floor
Side knock out plugs for gas lines
Designed to accommodate a variety
of beer kegs
General Specification
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
L D H
SDD-30-23 1
23 1/2
596
30 3/4''
782
38 3/4
984 1/6+ 115/60/1 1.92 5-15P
Height does not include 15 1/4'' (388mm) for draft arm. Plug type varies by country.
Two-faucets column is option
NEMA Config.
1
MODEL FEATURES:
Specifications subject to change without notice.
Capacity
1/2 Barrels
HP Voltage Amps
SABA
Add: 3390 Enterprise Avenue, Hayward, CA 94545-3228
Tel: (510) 293-0189 Fax: (510) 293-0199 E-mail: info@sabacorpusa.com Website: www.sabacorpusa.com
Model Doors
Cabinet Dimensions
(inches / mm)

Summary of content (2 pages)