Use and Care Manual

limiting the movement of the fryer. This device will prevent the gas line or quick disconnect
from being strained. The restraining device should be attached to the cutout on the back panel.
See illustration for location.
 The fryer must be installed with a connector (not supplied by Factory) complying with the
above
codes.
 The fryer must be installed with restraining means to guard against transmission of strain to the
connector. See illustration.
 The fryer must be installed with the casters provided.
 If the restraint is ever to be disconnected, first turn the gas supply off. If disconnection of the
restraint is necessary, to reconnect this restraint after the fryer has been returned to its originally
installed position.
LEVELING THE FRYER
Check the level of the fryer by placing a level on top of the fryer after gas connections have been made.
Ensure that the fryer is level front-to-back and side-to-side in the final installed position.
Lock the wheels after unit is level.
OPERATION
Hot oil and parts can cause burns. Use care when operating, cleaning and servicing the fryer.