Operation Manual

System

9.1.7 Tuner Configuration

This menu control Cable and Terrestrial tuner. Press [ok]

button, then press [▲, ▼] buttons to select on option, at

last press [ok] button. Or press [◄,►] buttons to select

Cable or Terrestrial.

Cable: The Install menu will display Cable Install menu,

then you can scan cable channels.

Terrestrial: The install menu will display Terrestrial

Install menu, then you can scan Terrestrial channels.

9.1.8 Conditional Access

In this menu, Press [ok] button, then press [▲, ▼]

buttons to select on option, at last press [ok] button. Or

press [◄,►] buttons to select Disable or Enable.

Disable: the Conax block can not work.

Enable: the Conax block can work.

9.1.9 Contact

This menu is note the message of provider. There are

Name, Telephone and website. At those options, press

[ok] button to enter into contact rename menu and

input relevant messages.

9.1.10 System Information

This menu is show the message about the STB. There are

STBID, System Version, Dbase Version, Kernel Version,

U-Boot Version and Last Update.

9.2 PVR/HDD Setting

In this menu, it has HDD Format, USB Speed Testing,

Record Setting, Timeshift Setting and Youtuble

Record Setting.

9.2.1 HDD Format

The menu show the message about the USB disk.

Format Disk:

1. Press [red] button and press [▲, ▼] buttons to

select a format for the disk, then press [ok] button

You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)