Operation Manual

System
37
9.1.5 Factory Default
This menu is operating for database.
1. Load From Factory Default: Press [ok] button, it
display a warn information, select "YES" to come
back factory default.
Note: If you do Save As Factory Default before, it
will be back the database that you save.
2. Factory Reset: Press [ok] button, it display a warn
information, select "YES" to come back factory
default.
3. Save As Factory Default: Press [ok] button, it
display a warn information, select "YES" to save the
current database as factory default.
4. Delete All Channel: Press [ok] button, it display a
warn information, select "YES" to delete all
channels.
? Frequently Asked Question
Q: IF I incautiously delete all channels, what should I do?
A: There are two ways to restore:
To re-search all channels in “Installation” function.
Use “Default Value” function to restore all channels in
“Tools” function
9.1.6 Miscellaneous Setting
1. Banner display time: Press [ok] button, then press
[▲, ▼] buttons to select on option, at last press [ok]
button. Or press [◄, ►] buttons to select option. It
controls the info bar display time. The options have
sec1-sec20.
2. Osd transparency: Press [ok] button, then press [▲,
▼] buttons to select on option, at last press [ok]
button. Or press [◄, ►] buttons to select option.
3. Standby mode: Press [ok] button, then press [▲,
▼] buttons to select on option, at last press [ok]
button. Or press [◄, ►] buttons to select TRUE or
FALSE.
TRUE: When standby, only the front panel work, it
save electricity.
FALSE: When standby, it just stop output video and
audio, this case can’t save electricity.
4. Remote mode: Press [ok] button, then press [▲, ▼]
buttons to select on option, at last press [ok] button.
Or press [◄, ►] buttons to select RC1,RC2 or
RC1&2.
RC1: The remote mode must use RC1, or STB can't
receive the control signal.
RC2 : The remote mode must use RC2, or STB can't
receive the control signal.
RC1&2: The remote mode no matter what, the STB
can receive the control signal.
5. HBBTv: It control HBBTv function. Press [◄, ►]
buttons to change it between ON and OFF.
ON: You can press [red] button to into the web at
has HBBTv function channel.
OFF: The HBBTv function can’t use.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)