Operation Manual

Installation
30
You can either connect to two antenna with a single LNB
switch using an RF cable.
8.1.2 DiSEqC
You can either connect to several antennas with a LNB
switch using RF cable.
8.1.3 Using LNB Switch Only
You can search only channels of one or two satellite
using the fixed antenna.
1. Check that your antenna connection and the
selected antenna type are correct.
2. Select a satellite figure and press the [green]
button.
 Satellite: Select the satellite.
 Tuner Select: Choose Tuner 1 or Tuner 2
 Connection Type: Choose Separated or Loop
Through.
Note: Only choose Tuner 2, this item can edit.
 LNB: Select the LNB frequency.
 22kHZ: Select On when using a 22kHZ tone
switch box.
 DiSEqC: Select the DiSEqC switch,
 Power: Select the becoming value.
3. Press [red] button.
 Mode:
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)