Operation Manual

Basic Operations
16
config Setting allow you config sth about online.
Message auto play: Press [◄, ►] buttons to switch it
between Enable and Disable.
Enable : Allow the message auto play in full screen
when it play video.
Disable: The message can't auto play in full screen
when it play video.
Software Upgrade Notify: Press[◄, ►] buttons to
switch it between Enable and Disable.
Resource Transfer Mode: Press [◄, ►] buttons to
switch it between HTTP and FTP.
4.7 SCAN CHANNEL
Go to menu/Install/Satellite Install/Satellite, select an
appropriate satellite and then press [red] button to scan
channels.
Note: If don't scan channels, please contact the local
satellite antenna supply.
5 Basic Operations
5.1 Changing channels
You can change the channels in several ways.
 Press the [▲, ▼] buttons in the full screen.
 Enter the channel number directly with number
buttons.
 Go to the TV List or Organizing Channel and select
a channel.
Note:
 Press the [TV/RADIO] button to switch between TV
and radio channels.
 Press the [RECALL] button to return to the previous
ten channels.
5.2 Volume/Mute/Audio
To adjust the audio volume, press the [, ] or [V+, V-]
buttons.
To mute the audio temporarily, press the [MUTE] button.
5.3 Setting audio options
Audio options are available only when the programme
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)