Operation Manual

English
21
and NIT Search on/off. After you set up,
press [ENTER] key to start scanning.
4. In the “TP Scan” item, press [EXIT] key
to exit the scanning and save the current
parameters.
10.1.3 Single Scan
1. Press [RED] key, it will show up a dialog
to ask you scan mode (means you want to
scan all channels or only scan free channels),
program type (means you want to scan all
channels or only scan TV/Radio channels),
scan type (means preset scan, that is
searching the existed TP. Automatic Scan
means blind scan. It is no need existed TP
info) and NIT Search on/off. After you set up,
press [ENTER] key to start scanning.
10.1.4 Auto Diseqc
This function will try to analyze Your
dish/LNB configuration and automatically
scan for founded settings.
10.2 FastScan Satellite
In this menu, you can search the channels
fast by set the following parameters:
Provider: can select the provider according
your situation.
Search Type: you can select the search type
as HD or SD.
Auto DiSEqC: if set to ON, it will check the
signal automatically, and find the signal from
which port of the DiSEqC switch.
LCN: if set to ON, the channel number will
display according the information from the
stream, if set to OFF, the channel number will
display normally.
11 Menu “System”
When you enter to “system” menu, you will
see the screen like below:
11.1 In “system” menu:
1. Press [/] and [/] keys to select
menu items among basic setting, PVR/HDD
setting, Net setting, upgrade and them's
submenu
2. Press [ENTER] key to enter the selected
item.
basic setting