Operation Manual

NVR User Manual
87
Factory Reset
Choose ” (Parameter Configuration) > System Management > Factory Reset”. The
Factory Reset page is displayed.
Click Factory Reset button, then click OK button in the pop-up message box and all
parameters will return to factory settings. The NVR device will reboot automatically.
Reboot
Choose ” (Parameter Configuration) > System Management > Reboot”. The Reboot
page is displayed.
Click Reboot button, then click OK button in the pop-up message box.The NVR system
will reboot.
Auto Restore
Choose ” (Parameter Configuration) > System Management > Auto Restore”. The Auto
Restore page is displayed.
You can configure the Date and Time. The NVR system will be maintained at the setting
time.