Quick Start Guide

V1.0
Quick Installation Guide
Indoor Wireless HD IP Camera
Package Contents
Quick Installation Guide
Resource CD
IP Camera
AC Adapter
USB Power Cable
1 Hardware Introduction
Physical Description
Induction IC
Lens
Infrared Lamp Array
Network Light
Power Light
Microphone
Micro SD Card Slot
LAN
WPS/Reset
Power
Hardware Installation
1. Rotate the base of the camera until points a and bare
aligned, this allows for the mounting plate to be
removed.
2. Install the mounting plate on a wall or ceiling with
supplied fixing screws.
3. Align points a and b to insert the camera base to the
mounting plate. Rotate so that points a and b are no
longer aligned, this attaches the camera securely to
the base.
a
b
a
b
Hardware Connection
1. After connect the AC power adapter to the camera,
the camera is in EZLink mode by default.
2. Turn on your wireless router.
Before you continue, please note:
Make sure your smart phone is located near the camera.
Do not use an ethernet cable to connect the camera if
you want to use a wireless connection.
Make sure smart phone is connected to your wireless
router.
WPS
Model: SABIP1600
Quick Installation Guide
Indoor Wireless HD IP Camera
Model: SABIP1600